[2017 Cisco Dumps Video] Real Cisco CCNP Security 300-209 Dumps SIMOS PDF Exam Implementing Cisco Secure Mobility Solutions Free Download
Who can share new Cisco 300-209 dumps? The Implementing Cisco Secure Mobility Solutions (300-209 SIMOS) exam is a 90 minutes (65 – 75 questions) assessment in pass4itsure that is associated with the CCNP Security certification. “Implementing Cisco Secure Mobility Solutions” is the exam name of Pass4itsure Cisco 300-209 dumps test which designed to help candidates prepare for and pass the Cisco 300-209 exam. Real Cisco CCNP Security 300-209 dumps SIMOS pdf exam Implementing Cisco Secure Mobility Solutions free download. Pass4itsure IT Certification has years of training experience. Pass4itsure Cisco https://www.pass4itsure.com/300-209.html dumps exam training materials is a reliable product.
[2017 Cisco 300-209 Dumps Video From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWTlN6bWE4ckRMNmc
[2017 Cisco 300-360 Dumps Video From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWRzV4WUQyeVN2N2c
Following Cisco 300-209 Dumps 271QAs Are All New Published By Pass4itsure
QUESTION 21
Which two VPN types can you monitor and control with Cisco Prime Security Manager? (Choose two.)
A. AnyConnect SSL
B. site-to-site
C. clientless SSL
D. IPsec remote-access
300-209 exam Correct Answer: AD
QUESTION 22
Which three options are default settings for NTP parameters on a Cisco ASA? (Choose three.)
A. NTP authentication is enabled.
B. NTP authentication is disabled.
C. NTP logging is enabled.
D. NTP logging is disabled.
E. NTP traffic is not restricted.
F. NTP traffic is restricted.
Correct Answer: BDE
QUESTION 23
You have installed a web server on a private network. Which type of NAT must you implement to enable access to the web server for public Internet users?
A. static NAT
B. dynamic NAT
C. network object NAT
D. twice NAT
300-209 dumps Correct Answer: A
QUESTION 24
Refer to the exhibit
Which type of ACL is shown in this configuration?
A. IPv4
B. IPv6
C. unified
D. IDFW
Correct Answer: C
QUESTION 25
Refer to the exhibit.
Which statement about this access list is true?
A. This access list does not work without 6to4 NAT
B. IPv6 to IPv4 traffic permitted on the Cisco ASA by default
C. This access list is valid and works without additional configuration
D. This access list is not valid and does not work at all
E. We can pass only IPv6 to IPv6 and IPv4 to IPv4 traffic
300-209 pdf Correct Answer: A
QUESTION 26
Which kind of Layer 2 attack targets the STP root bridge election process and allows an attacker to control the flow of traffic?
A. man-in-the-middle
B. denial of service
C. distributed denial of service
D. CAM overflow
Correct Answer: A
QUESTION 27
CORRECT TEXT A. Please check the steps in explanation part below
300-209 vce Correct Answer: A
QUESTION 28
Refer to the exhibit.
What is the effect of this configuration?
A. The firewall will inspect IP traffic only between networks 192.168.1.0 and 192.168.2.0.
B. The firewall will inspect all IP traffic except traffic to 192.168.1.0 and 192.168.2.0.
C. The firewall will inspect traffic only if it is defined within a standard ACL.
D. The firewall will inspect all IP traffic.
Correct Answer: A
QUESTION 29
Which statement about the configuration of the Cisco ASA NetFlow v9 (NSEL) is true ?
A. To view bandwidth usage for the NetFlow record, you must enable QoS features
B. Use sysopt command to enable NSEL on a specific interface
C. NSEL can be used without a collector configured
D. NSEL tracks the flow continuously and provides updates every 10 seconds
E. You must define a flow-export event type under a policy
300-209 exam Correct Answer: E
QUESTION 30
By default, not all services in the default inspection class are inspected. Which Cisco ASA CLI command do you use to determine which inspect actions are applied to the default inspection class?
A. show policy-map global_policy
B. show policy-map inspection_default
C. show class-map inspection_default
D. show class-map default-inspection-traffic
E. show service-policy global
Correct Answer: E
QUESTION: 31
You have created the following WSDL definition to describe a PO service that accepts
purchase orders submitted by customers: However, when you try to use this WSDL definition, your system returns an error message stating that it is invalid due to a problem with namespaces. Which of the following revised WSDL definitions correct the problem?
A. Option A
B. Option B
C. Option C
D. Option D
300-209 dumps Answer: B
QUESTION: 32
You are in the process of designing a service that manages content in a database of medical images. The service is able to add, update and delete images in the database.
Each of these three functions requires a separate message exchange with the service.
Therefore, the XML schema for this service provides an “addimage” element, an “updateimage” element and a “deleteimage” elements for the request messages, and
separate “addlmageResponse,” “updateimageResponse” and “deletelmageResponse”
elements for the response messages. Which of the following describes the minimum
number of WSDL “message”, “operation”, “portType”, “binding”, and “service”
elements that the WSDL definition must have for this service?
A. 6 “message” elements, 3 “operation” elements,1 “portType” element, 1 “binding” element, 1 “service” element
B. 3 “message” elements. 3 “operation” elements,1 “portType” element, 1 “binding”
element, 1 “service” element
C. 6 “message” elements, 6 “operation” elements, 3 “portType” elements, 1 “binding”
element, 1 “service” element
D. 6 “message” elements, 3 “operation” elements, 3 “portType” elements, 3 “binding”
elements, 1 “service” element
Answer: A
QUESTION: 33
You have developed a Library service that provides an “AddBook” operation that is able to add a book record to a library system. This operation accepts a message based on an “AddBookRequest” element that contains book record details, such as its author and title. It then responds with a message based on the “AddBookResponse” element that acknowledges that the book was successfully added. Below is the current WSDL definition:
You are asked to extend this WSDL definition in order to add a new “DeleteBook” operation that is able to receive a request message based on the “DeleteBookRequest” element and reply with a response message based on the “DeleteBookResponse” element. Which of the following describes the minimum number of message, operation and “portType” elements that will need to be added in order to fulfill these requirements?
A. 2 “message” elements, 2 “operation” elements, 1 “portType” element
B. 2 “message” elements, 2 “operation” elements, zero “portType” elements
C. 1 “message” elements, 1 “operation” element, 1 “portType” element
D. 2 “message” elements, 1 “operation” element, zero “portType” elements
300-209 pdf Answer: D
QUESTION: 34
You are building the Balance Request service that allows customers to request their current account balance. You have developed the following schema (called “balanceRequest.xsd”) to define the elements used in the messages exchanged by the
service: The “balanceRequest” element is to be used as the basis of the request message sent by a customer to the service. The “balanceResponse” element is to be used as the basis of the response message sent out by the service. Which of the following WSDL definitions correctly describes this service?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
QUESTION: 35
You have written the following XML schema to describe a message that contains
employee payroll information: Your company’s enterprise architecture team reviewed your schema to ensure that it conforms to internal design standards used for XML development. They have notified you that although your XML schema is technically correct, it must use the “xsd” prefix for the XML Schema namespace, rather than making it the default namespace. Which of the following revised XML schemas complies to this internal design standard while retaining its original meaning?
A. Option A
B. Option B
C. Option C
D. Option D
300-209 vce Answer: A
QUESTION: 36
A new requirement comes your way to create a Pay service that needs to be able to
retrieve employee payroll information. To fulfill this requirement, you first define the following XML schema (called “Pay.xsd”) that describes the structure of the messages that will need to be exchanged by the Pay service: The “PayLookup” element is intended to represent the request message received by the Pay service. It contains the “empNumber” child element that will provide the employee number used by the Pay service to carry out the search. The “PayLookupResponse” element is intended to represent the response message returned by the Pay service after it has collected the requested employee payroll data. This element contains the same “empNumber” child element along with a “annualSalary” child element and a “yearToDateSalary” child element. Your next task is to incorporate this schema into the Pay service’s WSDL definition. Which of the following correctly maps elements declared in the XML schema to WSDL elements?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: A
QUESTION: 37
You work for a local police department and you just finished building a new Crime
Search service that allows police detectives to search a criminal database based on personal traits. The service returns identifying information for people that best meets
the search criteria. The schema for the service is shown here: A police department in a neighboring region wants to start using the Crime Search service. To help them build a service consumer program that will be able to interact with the service, they have requested that you provide them with two sample XML documents that show typical input and output message data. Which of the following pairs of XML elements will validate with the schema shown above?
A. Option A
B. Option B
C. Option C
D. Option D
300-209 exam Answer: B
QUESTION: 38
You are building the Quote Request service that allows other services to request the
current value of a stock. You have developed the following WSDL definition for this service: The “message” element named “QuoteRequestMessage” represents the request message sent to the service and the “message” element named “QuoteResponseMessage” represents the response message that the service responds with. Your next task is to
define the concrete description for this WSDL definition and you start with the “binding” element. This of the following represents the correct “binding” element for this WSDL definition?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
QUESTION: 39
You are asked to create an XML schema for a Postal service that accepts an address and returns the corresponding postal code. You are given the following specific instructions as to how the XML schema should be designed:
– The XML schema requires two elements named “PostalCodeLookup” and “PostalCodeResponse”.
– The “PostalCodeLookup” element must contain child elements named “address1”,
“address2,” “city”, “stateOrRegion” and “country”,in that order. Each of these elements must have the type string.
– The “PostalCodeResponse” element must contain only the postal code as a string and this element must not have any child elements. Which of the following XML schemas fulfills the requirements while also following the instructions?
A. Option A
B. Option B
C. Option C
D. Option D
300-209 dumps Answer: C
IT elite team continue to provide our candidates with the latest version of the Cisco 300-209 dumps exam training materials. Our staff made great efforts to ensure that you always get good grades in examinations. To be sure, Pass4itsure Cisco https://www.pass4itsure.com/300-209.html dumps exam materials can provide you with the most practical IT certification material.